I-CT5805 Cordless Drill, i-3/8 ye-Inch yokuDrila amandla iSeti kunye nebhetri yeLithium Ion kunye netshaja, isantya esiguquguqukayo

Umzekelo:

CT5805

Malunga nale nto:

  • 【Ukuqhuba okuSebenza okuphezulu okungasebenzisi zintambo】I-KANGTON Cordless Drill inikwe amandla yi-18V, i-2.0 Ah ibhetri ye-lithium, enokugcina iimeko zokusebenza ixesha elide kunye namandla amakhulu.I-voltage elinganisiweyo (i-18V) kunye nesantya sokungabikho komthwalo (0-350-1350RPM) ye-drill cordless drill inika amandla anamandla kwi-drill cordless drill.(Nceda ugcwalise ibhetri ngokupheleleyo phambi kokuba uyisebenzise okokuqala)
  • 【3/8 iChuck ye-21+3 yoLungiso lweTorque】I-3/8 enkulu ye-keyless chuck ifanelekile kwiintlobo ezahlukeneyo ze-drills kwaye inikezela ukulungiswa okuqinileyo kwi-drills.I-torque ephezulu ye-drill cordless drill (29 NM), i-21 + 3 i-clutch ye-torque ye-torque inikezela ngokuchaneka kokulungiswa kwe-torque ngokwezinto ezahlukeneyo.
  • 【Eyona meko intle yokusebenza】Ukubamba kwe-drill yamandla ombane kuthambile kwaye kukhululekile, kwaye awuyi kuziva udiniwe emva kokusebenza ixesha elide.Ngelo xesha, sixhotyiswe ngomsebenzi wokukhanyisa i-LED kwi-fuselage ukukubonelela ngokhuseleko lokhuseleko xa usebenza kwiindawo ezimnyama.Inkqubo yokutshatyalaliswa kobushushu igqibelele, okwenza kube nzima ukugxininisa ukushisa ngexesha lomsebenzi kunye nokukhusela umbane wombane.
  • 【Ephathekayo】Ukuze unelise ukuhamba kwaye ujikeleze ityala elimnyama elingenamanzi kunye nentambo yomzimba yenza i-cordless drill iphatheke ngakumbi.Uyilo olusebenzayo lubandakanya i-2-speed gears, ukujikeleza phambili kunye nokubuyisela umva kunye nokumisa ukujikeleza ukujikeleza.

Iinkcukacha zeMveliso

Iithegi zeMveliso

CD-1_副本_副本

I-Power Drill eyenza ukuba umsebenzi wenziwe.Ukuqinisa izikrufu?Ugqibile.Ukudibanisa ifenitshala entsha?Ugqibile.Ukugrumba ngomthi, iplastiki okanye umphezulu wentsimbi?Yenziwe, yenziwe kwaye yenziwe.I-KANGTON 18V 1/2 Inch Cordless Drill Driver sisixhobo sombane esifunayo kuyo nayiphi na iprojekthi yasekhaya.Le drill yamandla iza ne-2.0Ah Lithium Battery kunye ne-18V yetshaja.

  • I-Go-To DIY Drill-Olu bhola lungenantambo sisixhobo esifanelekileyo kwiimfuno zemihla ngemihla ezifana nezikrufu zokuqinisa, ukugrumba kwindawo kunye nokunye.
  • Ixesha elide lokuSebenza kunye noBomi bebhetri-Ibhetri ye-CT5805 yeLithium inenkqubo yokulawula ubushushu obutsha yokugcina ibhetri ipholile kwaye inamandla kwiprojekthi yakho.
  • Easy Bit Utshintsho - 1/2 intshi keyless chuck ivumela utshintsho bit ngokukhawuleza
  • Ulawulo lwesantya esiphezulu/esisezantsi-Fumana itorque eyongezelelekileyo ngesantya esisezantsi, okanye wenze umsebenzi wenziwe ngokukhawuleza ngesantya esiphezulu
  • Izalathisi zezalathiso-Jonga ngokukhawuleza kwisalathisi se-LED ngaphambili / ngasemva ukuze uhlale usazi ukuba uqhuba kweliphi icala.
  • Ukukhanya kwe-LED -Ikhanyisa indawo yokusebenza xa i-trigger icinezelwe, kwaye ukukhanya kuhlala kwimizuzwana eyi-10 emva kokuba i-trigger ikhutshwe.

Inzuzo

CD小-1_副本

I-25Nm-Torque Max

I-3 kwimodi ye-1 yokusebenza (I-Hammer, Driver, Drill) .18 + 1-isikhundla somkhethi we-torque iimpawu zokunciphisa amathuba okugqithisa kakhulu okanye i-snapping screws.

CD小-2

I-3/8" engenazitshixo ye-Auto Chuck

Enkulu 3/8"(10mm) i-Auto Chuck inceda ukuqinisa izikrufu ngemizuzwana, akukho xhala lokukhulula izikrufu xa usemsebenzini.

Iya kubonelela ngokuchaneka ngakumbi kohlengahlengiso lwetorque njengoko kufuneka.

2_副本

2-Isantya esiguquguqukayo

Ikhithi ye-drill yenzelwe ukuguquguquka kwe-2-speed setting (0-350RPM, 0-1350RPM) ukunika ulawulo oluchanekileyo lwe-DIY yakho naziphi na iiprojekthi.

I-SPEED

Ulawulo lwesantya olungenanyathelo

I-trigger yoxinzelelo eguquguqukayo ikuvumela ukuba ulawule isantya sokubhola ngokulula.Iinjongo ezininzi zokuhambelana nesicelo sakho osifunayo.

UKUSEBENZA kwe-LED

Ukukhanya komsebenzi oLungileyo

Ikiti yomqhubi wempembelelo eyakhelwe kwisibane esingaphambili se-LED sikhanyisa nayiphi na indawo yokusebenzela emnyama.

Ngalo lula ukukhanya okukhokelwayo okukhanyayo, unokusebenza kuyo nayiphi na imeko yomsebenzi.

换向1_副本

Phambili/Beka uLawulo

I-lever ye-F/R yale khithi ye-combo yomqhubi wempembelelo ilawula ngokulula indlela yokomba, yenza ukuba kukhuseleke ngokukhawuleza okanye ukususa izikrufu.Ngokucwangcisa iswitshi kwindawo esembindini, iya kutshixa isixhobo sokhuseleko.

ISHASHA

1pc 2000mAh Li-ion iibhetri

Yiza ne-1pc 2000mAh yeBattery ye-Li-ion kunye ne-1-2H yokutshaja ekhawulezayo enokusetyenziselwa amandla aqinileyo kunye nokuqina kunye nexesha lokuqhuba elinyamezelayo.

Ungahlala usebenza kwiprojekthi yakho.

螺丝_副本

Amasuntswana omqhubi aphindwe kabini

I-drill eyilwe ngeendawo zokubeka ezimbini zokubeka amasuntswana amabini anesiphelo esiphindwe kabini, ilungele kakhulu umsebenzi ongxamisekileyo kwaye ayiyi kuvumela amasuntswana akho ukuba alahleke.

Spec.

Akukho santya somthwalo 0-350/0-1350rpm
Isantya segiya ezi-2. Ukubaleka phambili nokubuya umva
Iisetingi zeTorque 18+1
Max.torque 29N.m
Iibhithi ezimbini ezakhiwe kwindlu; Nge-2pcs bit eyakhelweyo kwindlu
Izincedisi I-10mm ye-chuck engenazitshixo
Ibhetri ye-18V Li-ion
Ukukhanya komsebenzi we-LED
Nge hook ibhanti
Ukupakisha ibhokisi yombala

  • Ngaphambili:
  • Okulandelayo:

  • Bhala umyalezo wakho apha kwaye uwuthumele kuthi