CD5805 Cordless Drill Driver Kit , 18V Impact Drill , 3/8 ″ Keyless Chuck, isantya esiguquguqukayo kunye noKwakhelwe ngaphakathi kwe-LED yokuDla uMbane wokuDla uDonga, izitena, iinkuni, isinyithi.

Umzekelo:

CD5805

Malunga nale nto:

  • 【1 pc 2000mAh iibhetri kunye nokukhanya komsebenzi】Le mpembelelo yesando esingenazintambo iza nebhetri ye-1x 2000mAh Li-ion kunye ne-1-2H yokutshaja ekhawulezayo enokusetyenziselwa amandla awomeleleyo kwaye azinzile kunye nexesha lokubaleka elinyamezelekayo.Ibhetri eyongezelelweyo yenza i-screwdriver drill engenazintambo ihlale ilungele ukusetyenziswa ngaphandle kwesithintelo.Ungahlala usebenza kwiprojekthi yakho.Umqhubi we-lithium-ion drill kwi-18V-class kunye nokukhanya komsebenzi we-LED wangaphambili ukhanyisa nayiphi na indawo yokusebenza emnyama.
  • 【18+1 Clutch, 2-Isantya esiguquguqukayo kunye ne-29Nm Torque】I-Kangton cordless drill / driver, ene-19 izicwangciso ze-clutch eziguquguqukayo, i-step-less variable variable trigger (2-speed: 0-400RPM,0-1450RPM) inika ulawulo oluchanekileyo.I-3 kwimodi ye-1 yokusebenza (I-Impact Hammer, Driver, Drill), i-29Nm torque, kungakhathaliseki ukuba kukwakhiwa kwakhona kwendlu, ukuphuculwa, ubugcisa bezandla be-DIY, ukulungiswa, umsebenzi wegadi okanye ukulungiswa kwemoto, lo mandla ombane ngumlingane wakho omhle we-drill / umqhubi wemihla ngemihla.
  • 【Impembelelo & namandla】I-KANGTON 18V Isixhobo sokuqhuba i-Max siyilwe kunye ne-motor ye-motor ye-copper ephindwe kabini: i-29Nm torque max inika umthamo oqinileyo womthwalo.Umqhubi we-drill drill onamandla ukunika zonke iimfuno zemihla ngemihla kwanodonga lokubhoboza okanye isinyithi kwaye ufezekise ngaphezu kokuba ubulindele.I-drill handy drill yenza yonke into ingenzeki.
  • 【3/8 iChuck engenasitshixo kunye noPhambili/uGcino lolawulo】Olu qheliso lwamandla lulula kakhulu kwaye kulula ukulusebenzisa.Umqhubi we-Compact drill une-3/8''(10mm) enkulu engenazitshixo ye-chuck ebonelela ngokutshixa okuzenzekelayo okwenza ukuba isandla esinye sitshintshe ngokuhambelana ne-accessory.Ukutshintshela Phambili/Ukubuyisela umva kukuvumela nokuba ujije okanye utshintshe/ususe amasuntswana ngeenjongo zakho kunye nokutshixa umqhubi we-drill power.Sinikezela ngewaranti yonyaka omnye kunye nenkonzo yobomi bonke.Ndiyathemba ukuba unamava amnandi!

Iinkcukacha zeMveliso

Iithegi zeMveliso

CD-1_副本_副本

Bamba obu bukhaphukhaphu, bunamandla 18 Volt Lithium-Ion Cordless Drill nguPowerbuilt kwaye wenze umsebenzi okhawulezayo wokomba kunye nokuqhuba imisebenzi!Uya kuluthanda uyilo oludityanisiweyo kunye ne-2-.5 yeponti yobunzima.Inika ibhalansi enkulu kunye nentuthuzelo yokusetyenziswa okwandisiweyo.Isigqubuthelo somqheba serabha esinamacala amabini sinikezela ngokubambelela kwaye sinciphisa ukungcangcazela.I-3/8" iqhosha elingenazitshixo lenza utshintsho olukhawulezileyo, lukhululekile kwaye lulula, ngaphandle kwesitshixo se-chuck kwindawo engafanelekanga. Ifuna amandla Kukho i-170+ ye-intshi ye-intshi ye-torque kwimpompo, yondliwa ngesantya esiguqukayo senjini kunye ne-18 +1 indawo yeclutch Ulawulo oluchanekileyo.Kwaye ibhetri yeLithium-Ion inika ubunzima obulula, ubomi beshelufa obuphezulu kunye nexesha elide lokusebenza kuneebhetri zeNiCad.Ibhokisi yegiya yeplanethi yongeza amandla kweli candelo libalulekileyo kubomi benkonzo obude.Ukusebenza kwiimeko zokukhanya okuphantsiUyagqunywa nalapho , ngenxa yokukhanya kwendawo yokusebenza ye-LED eyakhelwe-ngaphakathi.Ukugqwesa konke, ikiti iquka iibhithi ze-screwdriver ezi-2 kunye ne-magnetic bit hodler yokutshintsha ngokukhawuleza.

Inzuzo

CD小-2

I-3/8" engenazitshixo ye-Auto Chuck

Enkulu 3/8"(10mm) i-Auto Chuck inceda ukuqinisa izikrufu ngemizuzwana, akukho xhala lokukhulula izikrufu xa usemsebenzini.

Iya kubonelela ngokuchaneka ngakumbi kohlengahlengiso lwetorque njengoko kufuneka

2_副本

2-Isantya esiguquguqukayo

Ikhithi ye-drill yenzelwe ukuguquguquka kwe-2-speed setting (0-450RPM, 0-1650RPM) ukubonelela ngolawulo oluchanekileyo lwe-DIY yakho naziphi na iiprojekthi.

UKUSEBENZA kwe-LED

Ukukhanya komsebenzi oLungileyo

Ikiti yomqhubi wempembelelo eyakhelwe kwisibane esingaphambili se-LED sikhanyisa nayiphi na indawo yokusebenzela emnyama.

Ngalo lula ukukhanya okukhokelwayo okukhanyayo, unokusebenza kuyo nayiphi na imeko yomsebenzi.

螺丝_副本

Amasuntswana omqhubi aphindwe kabini

I-drill eyilwe ngeendawo zokubeka ezimbini zokubeka amasuntswana amabini anesiphelo esiphindwe kabini, ilungele kakhulu umsebenzi ongxamisekileyo kwaye ayiyi kuvumela amasuntswana akho ukuba alahleke.

Spec.

Akukho santya somthwalo 0-400rpm/0-1450rpm
Isantya segiya ezi-2. Ukubaleka phambili nokubuya umva
Iisetingi zeTorque 18+1
Max.torque 29N.m
Iibhithi ezimbini ezakhiwe kwindlu; Nge-2pcs bit eyakhelweyo kwindlu
Izincedisi Ibhetri ye-18V Li-ion
1pc 1300mAh ibhetri.
Itshaja ekhawulezayo yeDC
Ukukhanya komsebenzi we-LED
Nge hook ibhanti
Ukupakisha ibhokisi yombala
I-10mm ye-chuck engenazitshixo

Ukupakisha:

ibhokisi yombala/pc 5pcs/ibhokisi
57 * 40.2 * 34 cm 10/8kgs
1660/3460/4360

  • Ngaphambili:
  • Okulandelayo:

  • Bhala umyalezo wakho apha kwaye uwuthumele kuthi